NOTE to self: IE 6.0 has a problem displaying both tables one after the other. Firefox 1.0 displays fine. Still need to resolve this.
I can convert this to wiki format for you if you want. It's less of a headache for me. does
this work better? --mow4212345
Lathe Bed Assembly
| Quantity | Part Description | Picture | Page(s) |
| 1 | Bed Casting | | 17-20 |
| 2 | Base Casting | | 17-20, 27
|
| 1 | Ways : 3.0 in (W) x 24.0 in (L) x 0.25 in (H) cold rolled steel (1018?)
| | 25 |
| 2 | Ways Cap Screws : 3/8 in - 16 | | 26 |
| 1 | Headstock/Ways Stud : 3/8 in - 16 x 3.25 in threaded rod | | 26 |
| 1 | Tailstock/Ways Stud : 3/8 in - 16 x 2.25 in threaded rod | | 26 |
| 6 | Flat Washers for 3/8 in - 16 threaded rod/screws | | 26 |
| 6 | Lock Washers for 3/8 in - 16 threaded rod/screws | | 26 |
| 4 | Nuts for 3/8 in - 16 threaded rod | | 26 |
Lathe Carriage Assembly
| Quantity | Part Description | Picture | Page(s) |
| 1 | Carriage Casting | | 28 |
| 1 | Front Carriage Clamp : 1 in (W) x 3 in (L) x 0.25 in (H) cold rolled steel
| | 31
|
1
| Back Carriage Clamp : 1 in (W) x 3 in (L) x 0.25 in (H) cold rolled steel | | 31 |
| 1 | Carriage Gib : 0.25 in square key stock (zinc-plated steel) | | 30 |
| 4 | Carriage Clamp Screws : 1/4 in - 20 flat head screws | | 31 |
| 1 or more | Front Carriage Clamp Shims: 0.75 in (W) x 3 in (L) x 0.001 in (H) brass shim stock | | 32 |
| 1 or more | Front Carriage Clamp Shims: 0.5 in (W) x 3 in (L) x 0.001 in (H) brass shim stock
| | 32 |
| 2 | Carriage Gib Screws : #10 - 24 x 0.75 in (L) | | 32 |
| 1 | Carriage Gib Thumb Screw : 1/4 in - 20 thumb screw | | 32 |
| 1 | Cross Slide Ways : 2 in (W) x 7 in (L) x 0.25 in (H) cold rolled steel | | 33 |
| 3 | Cross Slide Ways Screws : 1/4 in - 20 x 0.75 in (L) flat head screws
| | 33 |
